Software Reset; System Settings And Copy Setting Reset; System Setting Reset - Ricoh U-C1 B051 Service Manual

SOFTWARE RESET

5.3 SOFTWARE RESET
The software can be rebooted when the machine hangs up. Use either of the
following procedures.
Procedure 1
1. Turn the main power switch off and on.
2. Check that "Now loading. Please wait" is displayed and that the copy window
opens.
Procedure 2
1. Press and hold down the ! and ! keys together until the machine beeps (for
about 10 seconds).
2. Release both buttons.
3. Check that "Now loading. Please wait" is displayed and that the copy window
opens.

5.4 SYSTEM SETTINGS AND COPY SETTING RESET

5.4.1 SYSTEM SETTING RESET

To reset the system settings in the UP mode to their defaults. Use the following
procedure.
1. Press the User Tools/Counter key (").
2. Hold down the ! key and touch System Settings.
NOTE: Hold down the ! key before touching System Settings.
3. When the display asks if you want to reset the system settings, touch Yes.
4. Check that the completion message appears, and touch Exit.
5-82
26 July 2002
B051S503.WMF