Hotkey Operation; Call Osd Menu; Leading Hotkey Select - D-Link KVM-440 User Manual

6. Hotkey Operation

6.1. Call OSD Menu

Press <Scroll Lock> twice and then <Enter> to bring up the OSD "Main
Menu" on the monitor screen. All of the KVM parameters can be set up in
OSD mode. You can also execute some KVM functions in OSD mode.
<Scroll Lock> → <Scroll Lock> → <Enter>

6.2. Leading Hotkey Select

The two-step hotkey sequence is used for quickly executing certain functions.
By default, the leading hotkey is <Scroll Lock>. However, you may change
this at any time.
By pressing <CTRL> twice, input <New Hotkey>, and then pressing
<Enter>, you can change the leading hotkey.
The available leading hotkey options are <Scroll Lock>, <Num Lock>, or
<Caps Lock>.
Change Hotkey to
Scroll Lock
Num Lock
Caps Lock
Note: You can also change the leading hotkey by pressing <F1> from within
the OSD main menu. Please refer to section 7.3.5 Setup in OSD –
Hotkey.
Hotkey Sequence
<CTRL> → <CTRL> → <Scroll Lock> → <Enter>
<CTRL> → <CTRL> → <Num Lock> → <Enter>
<CTRL> → <CTRL> → <Caps Lock> → <Enter>
14