Enable / Disable Buzzer Sound; Auto-Scan Function - D-Link KVM-440 Product Manual

Section 3 - Operation
Press <Scroll.Lock> twice, then <B> and <Enter>. The buzzer sound will be disabled / enabled. The buzzer sound default
setting is ON.
<Scroll.Lock.><Scroll.Lock><B.><Enter>.(Figure.13)
Note: You can also enable/disable buzzer sound by pressing <F1> from the OSD main menu. Please refer to the Setup in OSD - Sound
section.
Enable the Auto-Scan function by pressing <Scroll.Lock> twice, then <S> and <Enter>. The KVM Switch will automatically
scan the connected computers sequentially at present intervals.
The mouse and keyboard will be disabled under this mode. This is necessary to prevent errors such as erratic movement and
incorrectly displayed characters from accidentally touching the mouse or keyboard.
D-Link KVM-440/450 User Manual
!
1
Enable./.Disable.Buzzer.Sound
B
Figure.13.-.Buzzer.Setup.Hotkey
Auto-Scan.Function
S
@
2
Scroll
Scroll
Scroll
24