7.7.4. Authorized user setup
Up to 3 authorized users can manage the KVM switch. To change the user
name and password, move the highlight bar over the user name. Pressing
the <Left> or <Right> arrow key will bring up the user name and password
setup window on the screen. Here, you may enter the new user's name
and password twice, then either press <Enter> to confirm or <ESC> to
cancel.
Figure 29: User name and password setup window
7.7.5. User Authority Setup
You can manage the authority level for each user. Specific users have
different access rights for each channel. To change the access rights for
each channel, move the highlight bar over the channel and press <A>, <1>,
<2> or <3> to set up the channel access rights for all users or for a specific
user. You are not required to manage the authority settings for the
administrator since the administrator already has full access to all
channels.
29