6.3.3. <ALT> Channel Shift Function
1. Start <ALT> Channel Shift Function
The <ALT> channel shift function is turned off by default. To enable/disable
this function, press the leading hotkey <Scroll Lock> twice, followed by
<ALT> and then <Enter>.
2. Switch channels using the <ALT> key
With the <ALT> channel shift function enabled, pressing either the <Left
ALT> or <Right ALT> key twice allows you to automatically shift one
channel to the left or right.
Enable/Disable <ALT> channel shift function
<Scroll Lock> → <Scroll Lock> → <ALT> → <Enter>
Switch one channel to the left
<Left ALT> → <Left ALT>
Switch one channel to the right
<Right ALT> → <Right ALT>
6.4. Channel Select - Cascade Chain Layer
You can select any active channel directly within a cascade chain connection.
To quickly select a channel in a specific layer, use the following hotkey sequence.
Press <Scroll Lock> twice, then <D>, followed by the cascade channel number
(1, 2, 3......16), and press <Enter>.
Select the first layer channel
<Scroll Lock> → <Scroll Lock> → <D> → <CH-L1> → <Enter>
Select the second layer channel
<Scroll Lock> → <Scroll Lock>
Select the third layer channel
<Scroll Lock> → <Scroll Lock>
→ <D> → <CH-L1>
→ <D> → <CH-L2> → <Enter>
→ <D> → <CH-L1>
→ <D> → <CH-L2>
→ <D> → <CH-L3> → <Enter>
16