7.7.2. Security Mode
To enable the security mode feature, move the highlight bar over Security
Mode and press the <Left> or <Right> arrow key to change it. The <F3>
Console Lock, <F6> Port Lock, and user authority functions can only
be used when security mode is enabled.
7.7.3. Change Administrator Password
To change the administrator password, move the highlight bar over
Admin/Password and press the <Left> or <Right> arrow key. The
administrator password setup window will then pop up on the screen. Enter
the new password twice and either press <Enter> to confirm or press
<ESC> to cancel and return to the previous screen.
Figure 28: Administrator password setup window
Figure 27: Security setup main window
28