6.3. Channel Select - Single KVM
6.3.1. Specific channel selection
You can quickly select specific computers using a two-step hotkey
sequence. Press <Scroll Lock> twice (Step 1), then enter the
corresponding number key (1 to 8/16) and press <Enter> (step 2) to
directly select the computer you want to control.
Select Channel
1
2
...
16
Note: You may also select individual computers in the OSD menu. Move
the indicator bar to the channel you wish to switch to by using the
<Arrow Keys>, <Page Up> or <Page Down>, then press <Enter> to
select that connected computer. Please refer to section 7.2 Channel
Selection in OSD.
6.3.2. Arrow Key Channel Shift Function
Press <Scroll Lock> twice, then press the <Left Arrow> or <Right
Arrow> key to shift one channel to the left or right.
Switch one channel to the left
<Scroll Lock> → <Scroll Lock> → <Left Arrow>
Switch one channel to the right
<Scroll Lock> → <Scroll Lock> → <Right Arrow>
Figure 12: Specific channel selection hotkey
<Scroll Lock> → <Scroll Lock> → <1> → <Enter>
<Scroll Lock> → <Scroll Lock> → <2> → <Enter>
<Scroll Lock> → <Scroll Lock> → <16> → <Enter>
15
Hotkey Sequence
...