Rear View; Single Stage Installation; Precautions - D-Link KVM-440 User Manual

• Reset Switch:
o To reset the device, press the reset button located on the front panel.
The reset switch must be depressed using a thin object, such as an
unfolded paperclip.

4.2. Rear View

•
8-Port
•
16-Port

4.3. Single Stage Installation

4.3.1. Precautions:

•
Please turn off all the computers and their attached devices before you begin the
installation of the KVM switch.
•
For computers with a Keyboard Power On function, please unplug the
power cords in advance. Otherwise, the switch may not work properly.
•
If a computer is running under Windows 98, please connect the computer to the
KVM switch via the PS/2 ports. Windows 98 does not support a first time
installation through a USB HID installation driver.
•
Some older computers may require you to enable USB functionality in the BIOS
for the USB interface to work properly.
Figure 3: 8-port KVM rear view
Figure 4: 16-port KVM rear view
8