Arrow Key Channel Shift Function; Alt> Channel Shift Function - D-Link KVM-440 User Manual

<Scroll Lock> → <Scroll Lock> → <1> → <Enter> or
<Scroll Lock> → <Scroll Lock> → <2> → <Enter> or
<Scroll Lock> → <Scroll Lock> → <16> → <Enter>
Note: You can also select computers using the OSD menu. Move the
indicator bar to the channel to switch using <arrow key>, <Page
Up> or <Page Down>, then press <Enter> to select the connected
computer. Please refer section 7.2 Channel Selection in OSD.

6.3.2. Arrow Key Channel Shift Function

Press <Scroll Lock> twice, and press the <Left Arrow> or <Right
Arrow> key to shift left/right one channel.
Switch one channel to the left
<Scroll Lock> → <Scroll Lock> → <Left Arrow>
Switch one channel to the right
<Scroll Lock> → <Scroll Lock> → <Right Arrow>
6.3.3. <ALT> Channel Shift Function
1. Start <ALT> Channel shift Function
<ALT> channel shift function is off by default. You can press the Hot-Key
<Scroll Lock> twice, <ALT> and then press <Enter> to turn this function
on or off.
2. Switch channels using the <ALT> key
Press either the left or right <ALT> key twice, the PC channel will
Figure 12: Specific channel selection hotkey
16