Icom IC-A14IC-A14S Instruction Manual page 19

D For IC-A14S
q Push [CLR] to select the frequency mode, if necessary.
w Set the desired frequency. (p. 8)
e Push and hold [MR] for 1 sec. to enter the select memory
write mode.
• Memory mode indicator blinks.
No frequency is displayed when a blank channel is
selected.
r Push [Y]/[Z] to select the desired memory channel num-
to select the desired memory channel num- to select the desired memory channel num-
ber.
t Push and hold [MR] for 1 sec. to program the set condi-
for 1 sec. to program the set condi- for 1 sec. to program the set condi-
tion into the memory channel and return to the frequency tion into the memory channel and return to the frequency tion into the memory channel and return to the frequency tion into the memory channel and return to the frequency
mode.
Blinks when select memory
write mode is selected.
MEMORY OPERATION
• EXAMPLE: Programming 123.450 MHz into memory Programming 123.450 MHz into memory Programming 123.450 MHz into memory
channel 51.
Push
Push Push Push Push Push Push Push or or or or or or or
Push and hold
for 1 sec.
Push or
*Shows briefly.
Push and hold
for 1 sec.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
14