Scan Operation; Scan Types; Com Band Scan - Icom IC-A14IC-A14S Instruction Manual

n Scan types
The IC-A14 has 3 scan types to suit your needs. IC-A14S
has 2 scan types.

COM BAND SCAN

108.00 118.00
MHz MHz
Scan
Jump
MEMORY SCAN
non-TAG channel
Mch 2 Mch 4 Mch 6
Mch 1 Mch 7
non-TAG
channel
Mch 19 Mch 10 Mch 8
WEATHER CHANNEL SCAN WEATHER CHANNEL SCAN WEATHER CHANNEL SCAN
Repeatedly scans all "TAG" weather channels. Weather Repeatedly scans all "TAG" weather channels. Weather Repeatedly scans all "TAG" weather channels. Weather
channels are available for the IC-A14 only. channels are available for the IC-A14 only. channels are available for the IC-A14 only.
Repeatedly scans
136.975
a l l f r e q u e n c i e s
MHz
o v e r t h e e n t i r e
COM band.
Repeatedly scans se-
lected memory bank's
all "TAG" memory chan- all "TAG" memory chan- all "TAG" memory chan-
nels. Used for checking nels. Used for checking nels. Used for checking
often-used channels and often-used channels and often-used channels and
bypassing usually busy bypassing usually busy bypassing usually busy
channels such as control- channels such as control- channels such as control-
tower frequencies. tower frequencies. tower frequencies.

SCAN OPERATION

n COM band scan
q Push [CLR] to select the frequency mode.
w Push [SQLY]/[SQLZ]
to set the squelch level to the to set the squelch level to the to set the squelch level to the to set the squelch level to the
point where noise is just muted.
For IC-A14
e Push [FUNC], then push [SCAN](2) to start the scan.
• When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push • To change the scanning direction, push • To change the scanning direction, push • To change the scanning direction, push • To change the scanning direction, push [Y]/[Z].
For IC-A14S
Y Y Z Z
e Push and hold
Push and hold Push and hold [ [ ] ] / / [Z] for 1 sec. to start the scan. [ [ ] ] for 1 sec. to start the scan. for 1 sec. to start the scan.
• When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push • To change the scanning direction, push [Y]/[Z]. • To change the scanning direction, push
r r To stop the scan, push
To stop the scan, push [CLR]. To stop the scan, push
Decimal point blinks during
scan.
5
[SCAN](2) [SCAN](2) to start the scan. to start the scan.
Y Y
[ [
[Z]
[Y]
[CLR]
[SCAN](2)
[FUNC]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
18