Memory Scan - Icom IC-A14IC-A14S Instruction Manual

5
SCAN OPERATION
n Memory scan
NOTE: Program 2 or more memory channels with "TAG"
setting to start memory scan.
q Push [MR] to select memory mode.
• For IC-A14, select the desired BANK if desired. (p. 12)
w Push [SQLY]/[SQLZ] to set the squelch level to the
point where noise is just muted.
For IC-A14
e Push [FUNC], then push [SCAN](2) to start the scan.
• When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
For IC-A14S
e Push and hold [Y]/[Z] for 1 sec. to start the scan.
• When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z].
r To stop the scan, push
[CLR].
Decimal point blinks during Decimal point blinks during Decimal point blinks during
scan.
19
n Weather channel scan
(Available with the IC-A14 only)
q Push [FUNC], then push [WX](7) to select a weather
channel mode.
w Set squelch to the point where noise is just muted with
et squelch to the point where noise is just muted with et squelch to the point where noise is just muted with
[SQLY]/[SQLZ].
e Push [FUNC], then push [SACN(2) to start the scan.
• When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears. • When a signal is received, the scan pauses until it disappears.
• To change the scanning direction, push [Y]/[Z]. • To change the scanning direction, push • To change the scanning direction, push
r To stop the scan, push [CLR].
To stop the scan, push To stop the scan, push
Decimal point blinks during
scan.
[Z]
[Y]
[MR]
[SCAN](2)
[FUNC]
to select a weather to select a weather
, then push , then push [SACN(2) [SACN(2) to start the scan. to start the scan.
[Z]
[Y]
[SCAN](2)
[WX](7)
[FUNC]