Part Ii Operation Guide; T01 Hardware; T01-01 Packaging; T01-02 Chassis - Huawei Tecal RH2485 V2 Operation Manual

Acceptance Manual
Tecal RH2485 V2 Server

T01 Hardware

T01-01 Packaging

T01-0101 Packaging
Objective
Test Networking
Diagram
Preset Conditions
Test Procedures
Expected Result
Test Description

T01-02 Chassis

T01-0201 Chassis Structure
Objective
Test Networking
Diagram
Preset Conditions
Test Procedures
Expected Result

Part II Operation Guide

To verify the server packaging
None
1. Check whether the packaging is intact and not soaking.
2. Check the components in the carton based on the packing list.
1. The packaging is in good condition and has no water stain.
2. All components listed in the packing list are intact.
None
To verify the server chassis structure.
None
The structure of the mainboard, hard disk backplane, I/O board, indicator board, VGA
board, and power board is proper.
1. Check whether there are any scratches or oxidation on the chassis surface or
deformation for the chassis cover.
2. Check the mounting ears and the installation.
3. Install the chassis cover on the server, and screw the chassis cover.
1. The chassis is in good condition, without scratches, oxidation, or deformation.
2. The mounting ears are in good condition and properly installed.
3. The chassis cover is properly installed and screwed.
4. Hard disks are inserted or removed smoothly without scratches on the surface
and fit the slots perfectly.
1
Part II Operation Guide