Handle Retention; Led Marking And Identification - Intel H2000 Technical Product Specification

Power Sub-System
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
*: Refer to the spec of CRPS Common Requirements Specification.
3.1.6

Handle Retention

The power supply has a handle to assist extraction. The module is able to be inserted and
extracted without the assistance of tools. The power supply also has a latch which retains the
power supply into the system and prevents the power supply from being inserted or extracted
from the system when the AC power cord is pulled into the power supply.
The handle protects the operator from any burn hazard through the use of industrial designed
plastic handle or equivalent material.
3.1.7

LED Marking and Identification

The power supply is using a bi-color LED: Amber and Green for status indication. Below are
table showing the LED states for each power supply operating state.
12
PSU Output Connector
GND
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
+12V
PMBus SDA*
PMBus SCL*
PSON
SMBAlert#
Return Sense
+12V Remote Sense
PWOK
Intel order number: G59059-006
®
Intel Server Chassis H2000 Family TPS
B9 GND
B10 +12V
B11 +12V
B12 +12V
B13 +12V
B14 +12V
B15 +12V
B16 +12V
B17 +12V
B18 +12V
B19 A0* (SMBus address)
B20 A1* (SMBus address)
B21 12V STBY
B22 Cold Redundancy Bus*
B23 12V load share bus
B24 No Connect
B25 CRPS Compatibility Check pin*
Revision 1.5