Sartorius PMA.Evolution Operating Manual page 31

Level 1 Level 2 Level 3
SETUP
| - - - APP.PRG.
| - - - UNIT 2
| |- - - o GRAMS
| |- - -
| - - - DEC 2
|- - -
|- - - o POLYR.
6.7.2.5 Activating the "LOCK" Function
The "LOCK" function protects the scale from unauthorized use. When this function is active, the scale readout shows weight values
only when there is active communication between the scale and a connected PC. If communication is interrupted, the readout
goes blank and the display shows a padlock symbol. Activation of the LOCK function is configured under "EXTRAS."
Access the Setup menu (see Chapter 6.7.2.1, page 29).
t
Level 1 Level 2 Level 3
DEVICE
| - - - EXTRAS
| - - - LOCK
|- - - o ON
|- - -
6.7.2.6 Password Prompt
In addition to the "LOCK" function, you can also configure password protection for additional security.
With this feature, the "LOCK" function can only be deactivated by entering the password you configure.
Entering the Password
When the password prompt appears, the numbers 1 2 3 4 5 6 appear on the display.
You can switch to the numbers 7 8 9 0 and back again via the O / P keys.
Enter the password by entering the individual numbers on the display.
t
When you enter the correct password, the "LOCK" function will be deactivated.
y
Level 4
Press !
t
Press O / P, select APP.PRG.
t
Press !, press O / P, select UNIT 2
t
Press !, press O / P, select setting (e.g., GRAMS)
t
Press !, "o" appears indicating the desired setting is applied.
PT.P.LB
t
Press §
t
Press O / P, select DEC 2
ALL t
Press !, press O / P, select setting
t
Press !, "o" appears indicating the desired setting is applied.
t
Press § several times to exit the menu
t
Level 4
Press O / P, select DEVICE, press !
t
Press O / P, select EXTRAS, press !
t
Press O / P, select LOCK, press !
t
Press O / P, select ON
t
Press !, "o" appears,
OFF
t
The "LOCK" function
y
Press § several times to exit the menu
t
is activated.
Operating Manual EVO1X | LAB1X
Operation
31