Allocation - Siemens SITRANS LR560 Operating Instructions Manual

3.6. Allocation

3.6.1. Event Index
The numeric component of the Event Code for a Condensed Status event. Use
the index number to identify a particular event in the list below.
Event
Index
0
2
10
11
12
14
15
25
28
29
30
31
33
34
35
36
37
38
a)
See
For example:
Event Code for Loss of Echo
Event Index
To select a particular event via the handheld programmer:
a) Go to Enable (3.5.1.) and select Yes to enable Condensed Mode.
b) Go to Event Index (3.6.1.) and enter the event index number corresponding
to the event.
To select a particular event via SIMATIC PDM:
a) Go to Maintenance & Diagnostics > Condensed Status > Enable and
select Yes to enable Condensed Mode.
b) Go to Maintenance & Diagnostics > Allocation Level.
c) For each event, you can select either the Status or the Diagnosis line, then
choose a Status or Diagnosis option from the associated pull-down menu.
Page 84 SITRANS LR560 (PROFIBUS PA) – OPERATING INSTRUCTIONS
Event
Event Description
Code
S0 Loss of Echo
S2 No Tech Power
S10 Level Transducer Block (LTB) Scale
S11 Internal Temperature Sensor
S12 Internal Temperature High
S14 AIFB1 PV Range
S15 AIFB2 PV Range
S25 Internal error
S28 Memory RAM
S29 Memory EEPROM
S30 Memory EEPROM Flags
S31 Memory Flash
S33 Internal Temperature Calibration
S34 Velocity Calibration
S35 Receiver Init Calibration
S36 Receiver Calibration
S37 Technology Module Calibration
S38 Technology Module Ramp
General Fault Codes on page 108
a)
for the meaning of each event.
= S0
= 0
7ML19985LT01