Table of Contents
Advertisement
> Open the embroidery motif on the machine and edit as desired.
> Mark the embroidery motif position and the size on the fabric in a suitable way.
> Select the embroidery hoop as small as possible.
> Hoop or stick the fabric along with the appropriate stabilizer in the embroidery hoop, depending on the
stabilizer.
> Pull the fabric tube carefully over the free arm of the machine and attach the embroidery hoop at the
clutch of the embroidery module.
> If necessary, reposition the embroidery motif.
> Previously check whether the embroidery hoop can be moved forwards and backwards according to the
embroidery motif size.
> Touch the icon «Check embroidery motif size».
> After the successful check of the embroidery motif size, start the embroidery process.
check
Detailed instructions about embroidery, the use of suitable materials or selecting the required embroidery
settings of the machine can be found in the «Tutorial» under embroidery techniques --> Embroidering.
15.12 Administering embroidery motifs
Administering embroidery motifs
1
Loading the embroidery motif
2
Adding an embroidery motif
Saving embroidery motifs in the personal memory
In the filing system «Personal memory» any stitch patterns, also those which have been individually edited,
can be saved.
> Select an embroidery motif.
> Edit the embroidery motif.
> Touch the icon «Selection».
> Touch the icon «Save the motif».
– The embroidery motif to be saved is outlined in yellow.
– Touch the icon «Embroidery machine» is activated.
> Touch the icon «Confirm».
1
2
3
4
3
Saving the embroidery motif
4
Deleting
Creative embroidering
191
Advertisement
Table of Contents
