Table of Contents
Advertisement
Multi-colored embroidery motif on/off
Multi-colored embroidery motifs can also be embroidered in one color.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Multi-colored embroidery motif on/off».
–
The embroidery motif is embroidered in one color.
Endless Embroidery
Allows to resume embroidering borders which have already been started even if the machine has been
switched off and on again.
Prerequisite:
• An embroidery motif for borders must be saved in the Personal Memory. The reference points must be
defined in the embroidery motif.
> Select border embroidery motif from the Personal Memory.
> Touch the icon «Embroidering».
> The icon «Endless embroidery» becomes visible in the right bar by scrolling upwards.
> Touch the icon «Endless Embroidery».
> Remove the hoop and rehoop the fabric so that the stitched out reference points are in the upper part of
the embroidery area and at least 3 cm (1.18 inch) from the top edge of the hoop.
> Attach the hoop.
> Touch the icon «Confirm».
– The hoop is moved automatically near the last stitch.
– The icon «AUTO» is activated and the hoop moves automatically near the last reference point.
> Via the arrow icons, determine on which side of the embroidered part the next reference point shall be
placed.
Creative embroidering
189
Advertisement
Table of Contents
