Table of Contents
Advertisement
Decorative stitches
> Make sure that the cord slides through the thread slot of the bobbin cover.
> Place the cord spool on the knee lifter.
> Check that the cord runs smoothly.
> If the thread doesn't glide smoothly at the hook cover, leave the hook cover open.
> If the hook cover is opened, deactivate the lower thread indicator in the Setup Program.
Sewing Pintucks
The cord lies on the wrong side of the material and is hold/sewn over by the bobbin thread.
> Sewing the first pintuck.
> Place the first pintuck in one of the side grooves in the presser foot.
> Sew additional pintucks parallel.
124
Advertisement
Table of Contents
