Table of Contents
Advertisement
Practical stitches
6.10 Reinforced darning, automatic
The reinforced Darning Program No. 23 is especially suitable for quick darning of worn or damaged areas.
The reinforced Darning Program No. 23 replaces threads along the lengthwise grain in all materials.
If the Darning Program does not cover the whole worn or damaged area, it is recommended to reposition
the work and the sew the Darning Program again. The length is programmed and can be repeated as
often as desired.
Via the direct entry length, a darning length up to 30 mm can be programmed.
> Attach the Buttonhole foot No. 3A.
> Touch the icon «Practical stitches».
> Select the reinforced Darning Program No. 23.
> Hoop light-weight materials in the round embroidery hoop (optional accessory).
> Start sewing top left.
> Sew the first row.
> Stop the machine.
> Push the button «Quick reverse».
> Finish sewing the Darning Program.
110
– The darning area stays evenly taut and cannot be distorted.
– The length is programmed.
–
The machine stops automatically.
Advertisement
Table of Contents
