Table of Contents
Advertisement
Preparation
2.5 Free arm
Adjusting the feed dog
NOTICE
Inappropriate handling of the fabric
Damage of the needle and the stitch plate.
> Let the sewing project be fed evenly.
With each stitch, the feed dog moves forward by one step. The length of this step is determined by the stitch
length selected.
With a short stitch length, the steps are very short. For example when sewing buttonholes and satin stitches.
The fabric is fed slowly under the presser foot, even when sewing at maximal speed.
> Push the button «Feed dog up/down» (1) to lower the feed dog.
> Push the button again to sew with the feed dog up.
Using the slide-on table
> Raise the needle.
> Raise the presser foot.
> Switch the machine off and disconnect it from the power supply system.
38
Let the fabric be fed evenly; this results in a more perfect stitch
formation.
Pulling or pushing the fabric will result in uneven stitches.
Holding back the fabric will result in uneven stitches.
1
035964.50.04_2014-08_Manual_B790_EN
Advertisement
Table of Contents
