Table of Contents
Advertisement
Quilting
Prerequisite:
• The Reverse pattern foot No.1C is attached.
> Touch the icon «Quilt stitches».
> Select the Handlook quilt stitch No. 1328 or 1347 or 1348 or 1350.
> If required, adjust the upper thread tension and the balance to the sewing project and the desired quilt
> Press the foot control or the button «Start/Stop» to start the machine.
10.4 Guiding the quilt work freely
Quilt gloves with rubber fingertips (optional accessory) will help when guiding the fabric.
It is recommended to use the slide-on table and the Free Hand System. With free-motion quilting, it is of
advantage to quilt from the center outwards and to guide the fabric using smooth, round movements to
form the design of your choice. Free-motion quilting and darning are based on the same free-motion
principles.
With stipple quilting, entire surfaces of the fabric are filled with quilt stitches. The single lines of stitching are
rounded and never cross one another.
Prerequisite:
• The top layer, the batting and the backing are pinned together or basted.
• The feed dog is lowered.
• The Darning foot No. 9 (optional accessory) is attached.
> Touch the icon «Practical stitches».
> Adjust the upper thread tension and the balance to the sewing project if necessary.
> Press the foot control or the button «Start/Stop» to start the machine.
> Hold both hands close to the presser foot like an embroidery hoop to guide the fabric.
> If the thread is lying on top of the fabric, slow down the movement.
142
stitch.
– The Straight stitch No. 1 is selected automatically.
Advertisement
Table of Contents
