Table of Contents
Advertisement
16 Embroidery
16.1 Embroidering via the button «Start/Stop»
In case of a power cut the embroidery process is interrupted. After the restart the machine goes to the
position which was embroidered last.
> Push the button «Start/Stop» to start the embroidery machine.
– All parts of the motif being in the current color are embroidered.
– The embroidery machine stops automatically at the end.
– Both threads are cut automatically.
– The embroidery machine switches to the next color automatically.
> Change the upper thread.
> Push the button «Start/Stop» to embroider the new color.
> After having completed the embroidery motif, finish the embroidery process by touching the icon «Finish
the embroidering process» (1), or touch the icon «Endless embroidery» (2) (see page 173) to embroider
the embroidery motif again as border.
1
16.2 Increasing the embroidery speed
To ensure the best embroidery quality, the speed when embroidering is reduced depending on the
embroidery position. Choose between the two options to either embroider at optimal or maximum speed.
Standard = optimal speed. It has to be considered that the quality of the embroidered embroidery motif at
maximum speed cannot be ensured.
By switching the machine off and on, the optimal embroidery speed is activated.
Prerequisite:
• The embroidery motif has been selected and the embroidering has started.
> Touch the icon «Embroidery speed».
– The maximum speed is activated.
> Touch the icon «Embroidery speed» again.
– The optimal speed is activated.
16.3 Adjusting the upper thread tension
The basic setting of the upper thread tension is provided automatically as soon as a stitch pattern or an
embroidery motif is selected.
The upper thread tension is set optimally at the BERNINA factory and the machine has been tested.
Metrosene-/Seralon thread size 100/2 (Company Mettler, Switzerland) is used for upper and bobbin thread.
2
Embroidery
195
Advertisement
Table of Contents
