Table of Contents
Advertisement
Sewing preparation
Raising/Lowering the needle
>
Sink the heel back on the foot control to raise/lower the needle.
Programming the foot control individually
The foot control, i. e. the back kick function can be programmed individually (see page 60).
2.4 Spool pin
Swiveling spool pin
Installing the spool holder
With metallic or other special threads, it is recommend to use the swiveling spool pin.
The swiveling spool holder is necessary when several threads are sewn and it can also be used for bobbin
winding while sewing.
> Swivel the spool holder up as far as it will go.
Inserting foam pad and thread spool
The foam pad prevents the thread from getting hooked at the swiveling spool holder.
> Place the foam pad on the swiveling spool holder.
39
Advertisement
Table of Contents
