Reducing Color Changes; Multi-Colored Embroidery Motif On/Off; Endless Embroidery - Bernina 700 Manual

Creative embroidering

Reducing color changes

When the embroidery motifs overlap, the color changes cannot be reduced.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Reduce thread change».

Multi-colored embroidery motif on/off

Multi-colored embroidery motifs can also be embroidered in one color.
> Select an embroidery motif.
> Touch the icon «Embroidering».
> Touch the icon «Multi-colored embroidery motif on/off».

Endless Embroidery

Allows to resume embroidering borders which have already been started even if the machine has been
switched off and on again.
Prerequisite:
•
> Select border embroidery motif from the Personal Memory.
> Touch the icon «Embroidering».
> The icon «Endless embroidery» becomes visible in the right bar by scrolling upwards.
> Touch the icon «Endless Embroidery».
> Remove the hoop and rehoop the fabric so that the stitched out reference points are in the upper part of
> Attach the hoop.
90
– Identical colors of the embroidery motif are collected to one color.
– The embroidery motif is embroidered in one color.
An embroidery motif for borders must be saved in the Personal Memory. The reference points must be
defined in the embroidery motif.
the embroidery area and at least 3 cm (1.18 inch) from the top edge of the hoop.