Table of Contents
Advertisement
Replacing an Adapter in a PCI Adapter Cassette
CAUTION:
Metal edges might be sharp.
C38
This procedure is performed when preparing to install a new adapter or a blank filler in the processor
subsystem or an I/O drawer. Familiarize yourself with the entire procedure before performing the following
steps.
1. Place the empty PCI adapter cassette assembly linkage on a flat work surface in front of you. Position
the cassette so that the handle is in the raised (up) position, and on the left, with the top of the linkage
facing away from you.
Note: Your PCI adapter cassette assembly linkage might not have the short or long adapter retaining
arms or the middle-spacer arm installed if you removed them during the removal procedure. In
the following illustration, both arms are shown.
58
Eserver pSeries 670 Installation Guide
1 Handle
2 Cassette Linkage Assembly
3 Retaining Arms
4 Middle-Spacer Arm
Advertisement
Table of Contents
