Table of Contents
Advertisement
Installing the Rack Top Frame
To install the rack top frame, complete the following:
1. If you have not done so, use the jack screws to stabilize and lift the rack off the floor, as follows:
a. Loosen the jam nut on each leveling foot by turning the nut counterclockwise.
b. Rotate each leveling foot downward until it contacts the surface on which the rack is placed.
c. Adjust the leveling feet downward as needed until the rack is level. When the rack is level, tighten
the jam nuts against the base by turning the nut clockwise.
1 Jam Nut
2 Rack Base
1
2
3
3 Rack Base
Appendix J. Removing and Installing the Rack Top Frame
169
Advertisement
Table of Contents
