Table of Contents
Advertisement
d. Remove the BPF (item 5 in the illustration on page 166) as follows:
Note: A grille covers the fan on the front of the fan assembly.
1) Locate the BPF to be replaced.
2) Remove the fan cover plate (item 6 in the illustration on page 166).
3) Loosen the upper and lower fasteners, using the torque tool.
4) Pull the BPF straight out of the BPE.
5) Repeat for the other BPF. There are two BPFs, one in front and one in back.
e. Remove any front and rear bulk power fillers.
5. To reduce the weight so that it is the maximum two-person limit, do the following:
1 Top Panels for Front and Rear Rack Top
Frame
2 Rack Top Frame
3 Left and Right BPE Rails
4
3
2
Appendix J. Removing and Installing the Rack Top Frame
4 Foam and Metal Air Baffle
5 Rack Top Frame Cross Brace
167
Advertisement
Table of Contents
