Removing And Replacing The Flip Display Lens - Motorola E815 Service Manual

Disassembly

Removing and Replacing the Flip Display Lens

26
1. Remove the battery cover, and battery as described in the procedures.
2. Insert the pointed edge of the disassembly tool into the seam between the main
lens and the flip sleeve edge and pry up the main lens edge (see Figure 14).
Figure 14. Removing the Flip Display Lens
3. Use the flat end of the disassembly tool into the gap and carefully separate the
display lens from the flip assembly.
4. To replace, align the display lens to the flip assembly. Expose the display lens
adhesive. Carefully press the display lens into position on the flip assembly.
5. Replace the transceiver board and flip assembly, keypad stiffener, speaker
cover, keypad bezel, antenna, battery, and battery cover as described in the
procedures.
January 24, 2006
E815, E816 CDMA
flip display lens
disassembly
tool
flip assembly
6809492A18-B
050277o