Removing And Replacing The Flip Lens - Motorola A780 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Flip Lens

6809488A90
1. Remove the battery cover, battery, SIM card, stylus, rear housing, and
transceiver board assembly, and flip assembly as described in the procedures.
2. Use the metal tweezers to remove the 2 rubber screw covers at the base of the
flip. Retain the screw covers for reassembly.
3. Using a Torx driver with a T-6 bit, remove the 2 screws at each corner of the
unit. Retain the screws for reassembly. See Figure 10a.
4. Using the disassembly tool, gently pry the lens up from the flip assembly at
the 2 insert ports. See Figure 10b.
A
Flip Assembly
B
Flip Lens
Figure 10. Removing the Flip Lens
5. To replace, the protective adhesive paper from the lens.
6. Insert the bottom of the lens in first and press it on to the flip assembly until
it snaps in to place.
September 20, 2004
Screw Locations
Disassembly
Disassembly Tool
Insert Ports
25