Level 2 Service Manual
Removing the CLI Lens and Camera Bezel
6809492A18-B
1.
Remove the flip sleeve as described in the procedures.
2.
Use the disassembly tool to pry the CLI lens away from the flip housing.
Flip housing
Figure 23. Removing the CLI Lens
3.
Lift the CLI lens away from the flip housing and discard it.
4.
Use the disassembly tool to pry the camera bezel away from the flip housing.
Disassembly tool
Figure 24. Removing the Camera Bezel
5.
Lift the camera bezel away from the flip housing.
6.
Remove any residual adhesive left from the foam gasket that held the bezel
down.
January 24, 2006
CLI lens
Disassembly tool
Camera bezel
Disassembly
050994o
Flip housing
050993o
35