4.3 Function Buttons
Short presses to access and step through MIN-MAX-AVG recorded
readings. Long press to exit the mode.
Long press to access 80ms PEAK RMS mode. CM44 and CM46.
Short presses to step through available modes for selected function
Long press to switch the display backlight ON or OFF. Backlight
switches off automatically after 32 seconds (approx.).
Short presses to access/exit the display hold mode
Relative Zero CM44
Relative & DC Zero CM46
4.4 Display Icons and Indicators
Figure 4-2 Display Icon Descriptions
Refer to Fig. 4-2 above for the display icon descriptions below:
Meter is displaying maximum (up arrow), minimum (down arrow) or
average reading (up and down arrows)
80ms PEAK current/voltage rms mode
Low current Accu-Tip
Auto range mode
Display Hold mode
FLIR CM4x USER MANUAL
TM
mode
10
Document ID: CM4x-en-US_AA