Table of Contents
Advertisement
4
Product Description
4.3 Meter Bottom
Figure 4.3 Back of meter.
4.4 Function Switch Positions
4.5 Control and Navigation Buttons
#NAS100167; r. AA/95680/95684; en-US
Photo-voltaic DC Voltage, Current, and Power measurements (Section
8.17).
External clamp meter adaptor mode (Section 8.7).
Low impedance mode (Section 8.10).
Full power saving mode.
AC/DC voltage measurements, using probe inputs (Section 8.9).
Ω
Resistance and continuity measurements, using probe inputs (Sections
8.12 and 8.13).
Capacitance (Section 8.14) and diode measurements (Sections 8.15 &
8.16), using probe inputs.
Current (AC/DC) measurements (Sections 8.6, 8.7, and 8.8).
Press to select an alternate mode for the selected function (Section
4.6).
From the automatic range mode, press to switch to the manual range
mode.
In the manual range mode, short press to change the range (scale),
and long press to return to the automatic range mode.
Short press to open/close the Thermal imager (Section 7).
1.
Common negative (-) test lead
connector
2.
Positive (+) test lead connector
3.
Keyed part of the COM test lead
connector
9
Advertisement
Table of Contents
