Quick Start Installation Instructions - Dentsply Sirona Cavitron Plus Directions For Use Manual

Quick Start Installation Instructions

1
Set unit to OFF position.
Symbol: means o .
A ir
4
Connect AIR supply
by pushing BLACK air hose
into air port.
7
Set unit to ON position.
Symbol: means on.
The indicator light will be
green when unit is on.
10
Adjust POWER LEVEL.
2
Connect POWER supply.
5
Install BATTERIES in wireless
(if equipped)
foot pedal unit.
8
Hold upright and depress foot
pedal until handpiece
FILLS WITH WATER.
TIP: adjust lavage control to higher
ow rate to increase water ow.
Tap-On™ Technology does not function
unless an insert is in the handpiece.
11
Adjust LAVAGE CONTROL on
handpiece to desired setting.
2
W at er
3
Connect WATER supply by
pushing BLUE water hose into
water port.
6
Connect HANDPIECE to cable.
TIP: Handpiece is detachable and
autoclavable. Make sure the electrical
connections are dry before connecting.
9
Place ULTRASONIC INSERT
into handpiece.
12
Consult Directions For Use for
daily maintenance, usage
techniques and more.