Samson 3730-2 Mounting And Operating Instructions page 89

3. Select communication from the Options
menu > Communication .
4. Click on Port settings and select port as
well as server settings.
5. Select Convert in the File menu to select
the firmware version of the positioner.
It must match the version specified in the
bar at the top.
6. In the Edit menu under Customer Data ,
enter further details about the plant, if
desired.
7. From the Edit menu, select Factory Defaults to upload default settings to the operator in-
terface.
Setup with TROVIS-VIEW software – parameter list
89
EB 8384-2 EN