Samson 3730-2 Mounting And Operating Instructions page 27

Note!
Always use the connect-
ing plate (6) included in
the accessories to con-
nect supply and output.
Never screw threaded
parts directly into the
housing.
Legend Figs. 8 and 9
1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Follower clamp (Fig. 8)
4 Coupling wheel
4.1 Screw
4.2 Disk spring
4.3 Scale plate
4.3 Scale plate
5 Actuator shaft
Adapter for Type 3278
6.1 Seal rings
7 Pressure gauge bracket
8 Press. gauge mounting kit
10 Top pair of brackets
10.1 Bottom pair of brackets
Fig. 9 · Attachment to rotary actuators
Attachment to the control valve – mounting parts and accessories
Control valve opens counterclockwise
Slot
Control valve opens clockwise
Slot
27
EB 8384-2 EN