Samson 3730-2 Mounting And Operating Instructions page 35

Table 6
Direct attachment
Accessories for
120 cm² actuator
Direct attachment
NAMUR attachment
Attachm. to micro valve
Attachment to rotary
actuators
Table 7
Accessories
Attachment to the control valve – mounting parts and accessories
Mounting parts for position sensor
Mounting parts for actuators with 120 cm², see Fig. 12, left
Connecting plate (9, old) for Type 3277-5xxxxxx.00
Actuator
Connecting plate (new) for Type 3277-5xxxxxx.01 Actuator (new)
Note! Only new switchover and connecting plates can be used with new actuators (modi-
fication index 01). Old and new plates are not interchangeable.
Mounting parts for actuators with 240, 350 and 700 cm², see Fig. 12, right
Mounting parts for attachment to NAMUR rib with levers L and XL, see Fig. 13
Mounting parts for Type 3510 Micro-flow Valve, see Fig. 14
VDI/VDE 3845 for all dimensions of fixing level 2
Mounting parts with follower clamp and coupling wheel
Version with CrNiMo steel bracket, see Fig. 15
VDI/VDE 3845 for all dimensions of fixing level 2, heavy version
SAMSON Type 3278 160 cm²/VETEC Type S160 and Type R,
heavy version
Positioner accessories
Connecting plate (6)
or pressure gauge bracket (7)
Pressure gauge mounting kit up to max. 6 bar
(output and supply)
Bracket for wall mounting of the positioner
Note! Further mounting parts are to be provided at the site of installation
as wall foundations may vary.
Order no.
1400-7472
1
G 1400-6820
8
1
NPT 1400-6821
8
1400-6823
1400-7471
1400-7468
1400-7469
1400-7473
1400-9384
1400-9385
Order no.
G ¼ 1400-7461
¼ NPT 1400-7462
G ¼ 1400-7458
¼ NPT 1400-7459
St. steel/Br 1400-6950
St. st./st.steel 1400-6951
0309-0111
EB 8384-2 EN
35