Samson 3730-2 Mounting And Operating Instructions page 23

Levers XL and L
1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Follower plate
3.1 Follower plate
6 Connecting plate
6.1 Seal rings
7 Pressure gauge bracket
8 Press. gauge kit
9 Stem connector
9.1 Bracket
10 NAMUR bracket
11 Screw
14 Bolt
14.1 Screws
15 U-bolt
16 Bracket
Fig. 6 · Attachment according to IEC 60534-6 (NAMUR)
Attachment to the control valve – mounting parts and accessories
Additional bracket for
2800 cm² actuators with
travel ≥ 60 mm
Note! Always use the connecting plate (6) included in the accesso-
ries to connect supply and output. Never screw threaded parts di-
rectly into the housing.
Attachment to
NAMUR rib
Attachment to rod-type
yokes,
rod Ø 20 to 35 mm
23
EB 8384-2 EN