Samson 3730-2 Mounting And Operating Instructions page 25

1 Lever
1.1 Nut
1.2 Disk spring
2 Follower pin
3 Clamp
6 Connecting plate
6.1 Seal rings
7 Pressure gauge bracket
8 Pressure gauge
mounting kit
10 Bracket
Note!
Always use the connecting plate (6)
included in the accessories to connect
supply and output.
Never screw threaded parts directly
into the housing.
Fig. 7 · Attachment to Type 3510 Micro-flow Valve
Attachment to the control valve – mounting parts and accessories
Lever S
EB 8384-2 EN
25