Advertisement
Quick Links
Stand-Alone Network Printer
MAC Installation Instruction
Network Printer Connection
Read Now BEFORE you unpack your equipment
Continue reading below
Right, let's get your Network
Printer up and running quickly...
Let's first get together the things you will need:
•
The box containing your Network Printer.
•
A Mac on which you have full admin rights to allow downloading
and installing software.
Advertisement
Related Manuals for Pitney Bowes Datamax w1110
Summary of Contents for Pitney Bowes Datamax w1110
- Page 1 Stand-Alone Network Printer MAC Installation Instruction Network Printer Connection Read Now BEFORE you unpack your equipment Continue reading below Right, let’s get your Network Printer up and running quickly… Let’s first get together the things you will need: • The box containing your Network Printer. •...
-
Page 2: Connecting The Printer
1. Opening the box and unpacking. Here’s a diagram and explanation of the items you should find in your box. If you have any problems during this installation, refer to ‘Troubleshooting’. Printer Network Cable Power Cord (not used for network installation) 2. -
Page 3: Printing A System Report
3. Printer ready. Wait for approximately 45 seconds until the green light remains constant and the printer is ready. 4. Aligning the label roll. Press the button and check that the label feeds out correctly. Note: If the label does not feed correctly please refer to label alignment instructions inside the printer top cover. - Page 4 • In the Adobe PDF printer dialog box, you must select 4x6 in label from the Paper Size menu. If you’re still having trouble, then visit support.pb.com/workstation and select Errors & Troubleshooting. *AW32664reva* AW32664 Rev. A 05/18 3001 Summer St. ©2018 Pitney Bowes Inc. Stamford, CT 06926 All Rights Reserved www.pitneybowes.com...