Envelope Feed Delay; Auto Envelope Eject - Pitney Bowes W660 Operator's Manual

Appendix A • Control Panel Menus
8. Envelope Feed
Delay
9. Auto Envelope
Eject
A-30
Use this option to feed very glossy material or if extra ink drying
time is needed. This option slightly reduces the overall through-
put of the printer.
To use this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until 8. FEED DELAY appears on the
LCD panel.
2. Press the Enter button to select this option.
The time delay (0 to 30 seconds) can be adjusted by
pressing the + button (MORE) or – button (LESS).
3. When you've finished making selections, press the Menu
button to back out of the menu until the printer dis-
plays OFF LINE. Then, press the On Line Button to
enable the printer.
Use this option to automatically eject the last envelope in your
job.
To use this option:
1. Press the + or – buttons to scroll through the Setup
Menu options until 9. AUTO ENVELOPE EJECT
appears on the LCD panel.
2. Press the Enter button to select this option.
3. Press the + button (ON) or the - button (OFF).
4. Press the Menu button to back out of the menu until the
printer displays "OFF LINE". Then, press the On Line
Button to enable the printer.
Pitney Bowes W660/W680 Operator Guide