Related Manuals for Pitney Bowes W1110
Summary of Contents for Pitney Bowes W1110
- Page 1 Workstation w1110 Windows Installation Instructions for LAN Unpack Items USB cable is not required Pitney Bowes W1110 Windows Installation Instructions for LAN...
- Page 2 To print the System Report, simultaneously press and release the two buttons shown in illustrations. b. Keep the printed report which will be needed later in the installation process. System Report Ethernet IP Ethernet MAC Ethernet DHCP Hostname Pitney Bowes W1110 Windows Installation Instructions for LAN...
- Page 3 Windows printer driver. Once downloaded, double click and then select Next. on downloaded Setup.exe to run the Seagull Windows Printer Driver for the Workstation w1110 printer. support.pb.com/workstation Select Next if default location for files is acceptable, Select Finish to run the Driver Wizard.
- Page 4 Select Next to install print driver. Select Network and press Next. Select Datamax-O’Neil w1110 printer model. Select Create Port. Pitney Bowes W1110 Windows Installation Instructions for LAN...
- Page 5 Step 10b above and select Next. If not found, Select “Generic Network Card”from the drop-down menu and select Next. Note: The Port Name will automatically be populated with a default value. Pitney Bowes W1110 Windows Installation Instructions for LAN...
- Page 6 The Wizard will return to the Specify Port screen. Select Next to accept the default printer name. Use the vertical scroll bar to view and confirm the new port created is present, and then select Next. Pitney Bowes W1110 Windows Installation Instructions for LAN...
- Page 7 Select Finish to complete the Wizard and begin using your printer. Need Additional Assistance? Visit support.pb.com/Workstation AW31977- Rev B, March 2016 Pitney Bowes W1110 Windows Installation Instructions for LAN...