Related Manuals for Siemens Cerberus DOTE1152
Summary of Contents for Siemens Cerberus DOTE1152
- Page 1 Cerberus® DOTE1152 Multi criteria smoke detector, interactive Technical description Fire & Security Products Siemens Building Technologies Group...
- Page 2 Data and design subject to change without notice. / Supply subject to availability E Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor. Der Empfänger anerkennt diese Rechte und wird dieses Dokument nicht ohne unsere vorgängige schriftliche...
-
Page 3: Table Of Contents
............Fire & Security Products 10.2002 Siemens Building Technologies Group... - Page 4 Fire & Security Products 10.2002 Siemens Building Technologies Group...
-
Page 5: Overview
Integrated multiple coincidence circuit suppresses extreme electrical and optical interference signals State–of–the–art, microprocessor–controlled electronics Transmission of 4 different danger levels and functional states each Automatic, comprehensive selftest Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 6: Design
The DOTE1152 is provided with a line isolation function. As a distinctive feature, the DOTE1152 detector is marked with a yellow circle which is visible when the detector is installed. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 7: Technical Data
Halogen-free plastic material identifiable through embossed code Note: The specified ambient conditions in accordance with the technical data must be met, to avoid a reduction of the service life of the CO sensor. e4070e Fire & Security Products Siemens Building Technologies Group 10.2002... -
Page 8: Algo-Parameter Sets For Dote1152
CO is present. (Priority CO.) Furthermore, it is possible to use the parameter sets of the DOT1151/52 without CO signal evaluation (see Technical specification, document no. 1027). Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 9: Design
(keep to the technical data). Light receiver Light stop Light source Smoke particles Transmitter optics Fig. 1 Principle of the scattered light measurement Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... - Page 10 A’ Light source CO-Sensor Labyrinth Light stop Labyrinth Smoke particles Light receiver Section A - A’ NTC temperature sensor Fig. 2 Detector design Fire & Security Products e4070e Siemens Building Technologies Group 10.2002...
-
Page 11: Operating Principle (See Block Diagram Fig. 3)
(part of the selftest). µP 14 LI 2 ASIC – Isolator only Detector Control unit in DOT1152 Socket Fig. 3 Block diagram DOTE1152 Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... - Page 12 The driver for the response indicators (RI) activates the internal RI and an ex- ternal RI under control of the control unit. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002...
-
Page 13: Selftest/Functional State
If the DOTE1152 can no longer be periodically addressed, for example due to a µP failure in the control unit, the detector automatically switches to emergency opera- tion. In the event of a fire the detector can still trigger a collective alarm. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 14: Line Disconnector Function
Temperature and relative humidity values outside the specified range reduce the service life of the CO sensor. If the detector is exposed to an atmosphere containing solvents for longer periods, the CO sensor may be damaged. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 15: Application
The DOTE1152 must be exclusively used as a fire detector. No CO gas warning is possible, as the detector always evaluates the measured CO values together with other values measured and analyses them only for the early detection of fires. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 16: Installation
Each base identification module is factory programmed with its own, unique serial number. If the swapped detectors are of a different type, an error message is signalled. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 17: Maintenance
CO is reached, the internal and external response indicators flash at inter- vals of approx. 4 seconds. No danger level is signalled. If mechanically damaged detectors must be scrapped, the plastic materials can be sorted out based on the embossed code. Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... -
Page 18: Terms
Microprocessor Multiplexer Resistor with negative temperature coefficient (Negative Temperature Coefficient) PolyRex DOT1151/DOT1152 combined smoke/heat detector, DOTE1152 combined smoke/heat/CO detector Detector tester Response indicator Generic term of fire detection system S11 Fire & Security Products e4070e Siemens Building Technologies Group 10.2002... - Page 19 Fire & Security Products Back Siemens Building Technologies Group 10.2002...
- Page 20 Siemens Building Technologies AG Alte Landstrasse 411 CH 8708 Männedorf Tel. +41 1 − 922 61 11 +41 1 − 922 64 50 www.cerberus.ch Fire & Security Products Back Document no. e4070e Siemens Building Technologies Group 10.2002 Edition 10.2002...