(V)PE-...-...(SW )
Fastening the protective cap (type
9 "Accessories"
S
Proceed as follows:
1. Insert the fastening pins into the
through holes 5.
2. Carefully press the protective cap
together until the hooks (A) and (B)
snap into place (do not break the
hooks off ).
6
Commissioning
S
Switch on the operating voltage.
S
Pressurize the compressed air connection with the pressure required as the
switching pressure, or evacuate the vacuum required as the switching vacuum.
S
Check the function by modifying the pressure or vacuum applied.
7
Care and maintenance
Cleaning
S
Switch off the operating voltage.
S
If necessary, clean the (V)PE-....
Permitted cleaning agents are:
– soap suds (max. +60 °C)
– all non-abrasive agents.
8
see section
)
Fig. 13
Festo (V)PE-...-...(SW) 2017-05c English
(A)
(B)
5