Toshiba MMD-AP0726HP-UL Service Manual page 88

No. Part name
2. Attachment
⑧ Fan motor,
Fan,
1) Screw the fan motor with the motor fixing plate.
(M8 x 0.8" (20mm), 2 pcs).
NOTE
Fix the wiring of the motor on the electrical parts
box side as right figure.
2) Attach the ground screw.
3) Put the fan in the fan case.
Attach the nose plate to the original position on the fan
case.
NOTE
Adjust the direction of the fan blade.
4) Insert the fan to the shaft.
5) Tighten the Screw C. (M8 x 0.8" (20mm), 8 pcs)
6) Insert the fan to where the shaft of the fan motor stops,
and adjust the flat portion(2 places) ,
then tighten the hexagon head bolt.
NOTE
Check that if the fan rotate smoothly without
touching the fan case.
NOTE
Be sure to use a torque wench for fixing and tighten
with 7.4 lbs
7) Hook the fan assembly on the looser screw B.
8) Tighten the screw A and B. (M8 x 0.8" (20mm), 10 pcs)
9) Connect the wires of the fan motor as before, and
close and fix the electrical parts box cover.
Be sure to wire in the electrical parts box as before.
10) Attach the bottom plate(fan side) to the original position.
Procedure
•
ft (10 N•m)
- 88 -
Remarks
Electrical
Wiring of
parts box
the motor
Fan blade
flat portion
shaft
flat portion
Hexagonal bolt
Ground
screw