Toshiba MMD-AP0726HP-UL Service Manual page 84

No. Part name
1. Detachment
④ Noise filter
P.C. board
1) Perform 1 of ① to remove the electrical parts box.
MCC-1551
2) Remove the connector of the below No. from the P.C.
board.
NOTE
First unlock the housing and then remove the
connectors.
CN01 : Power supply (Red wire)
CN02 : Power supply (White wire)
CN03 : Power supply (Red wire)
CN04 : Power supply (White wire)
3) Remove the screw of the ground wire.
4) Unlock the card edge spacers (4 position) in the
electrical parts box to remove the noise filter P.C. board.
2. Attachment
1) Mount the noise filter P.C. board in the electrical parts
box as before.
2) Be sure to wire in the electrical parts box as before.
NOTE 1
Check if there is no missing or contact failure
of the connectors.
NOTE 2
Be sure to wire as before.
3) Attach the electrical parts box cover as before.
Procedure
- 84 -
Remarks
Ground screws
CN04
CN03
Power supply
CN02
CN01