Toshiba MMD-AP0726HP-UL Service Manual page 86

No. Part name
⑥
PMV motor 1. Detachment
1) Perform 1 of ① to remove the electrical parts box
cover.
2) Loosen the fixing screws of the inspection cover and
open the inspection cover.
3) Remove the connector of the PMV motor.
CN82 : PMV motor (6P,Blue)
4) As shown in the right figure, using the two spanners,
and remove the PMV motor.
2. Attachment
1) Attach the PMV motor as before.
2) Connect the connector of the PMV motor as before
and close the electrical parts box cover.
Be sure to wire in the electrical parts box as before.
3) Fix the inspection cover with the fixing screws
(4 positions).
1. Detachment
⑦
Bottom
plate 1) Remove the screws A fixing the bottom plate
(fan side)
(fan side).
2) Loosen the screws B.
3) Slide the bottom plate (fan side) to the arrow
direction and remove the bottom plate (fan side).
2. Attachment
1) Hang the bottom plate (fan side) to the screws B.
2) Attach the removed screws A to the original positions
and fix the screws B.
Procedure
- 86 -
Remarks
connector of PMV motor
Screw
Inspection cover
PMV motor
screw A
Bottom plate
(fan side)
screw B