Reset Generator - Rabbit RabbitCore RCM3305 User Manual

D.1.3 Reset Generator
The RCM3305/RCM3315 uses a reset generator to reset the Rabbit 3000 microprocessor
when the voltage drops below the voltage necessary for reliable operation. The reset occurs
between 2.85 V and 3.00 V, typically 2.93 V.
The RCM3305/RCM3315 has a reset pin, pin 28 on header J4. This pin provides access to
the reset input of the reset generator, whose output drives the reset input of the Rabbit
3000 and peripheral circuits. The /RESET output from the reset generator is available on
pin 1 of header J4 on the RCM3305/RCM3315, and can be used to reset user-defined cir-
cuits on the motherboard on which the RCM3305/RCM3315 module is mounted.
User's Manual 137