Access Point Placement; Ap-7562 Hardware Overview; Ap-7562 Ports And Connections - Motorola AP-7562 Installation Manual

14

1.9 Access Point Placement

Observe the following recommended guidelines:
• Identify each piece of the mounting bracket and mounting extension arm hardware and ancillary
hardware.
• Mount the device with the black gore vent down.
• Mounting height for network devices should not exceed 30 to 35 feet. Mounting height should vary to
accommodate the topography of the deployment area, foliage, and other obstructions.
• Devices can be deployed using any of the recommended outdoor deployment procedures.
• Line of Sight (LoS) guidelines should be given special consideration when deploying devices.

1.10 AP-7562 Hardware Overview

The AP-7562 is a 3x3:3 802.11ac Access Point utilizing one 2.4 GHz 802.11n radio and one 5 GHz 802.11ac radio.
An AP-7562 must be installed by trained professionals familiar with RF planning and regulatory limits defined by
the regulatory bodies of the country where the devices are being deployed. All common precautions for grounding
and Electrostatic Discharge (ESD) protection should be observed during deployment and installation. AP-7562
Access Points must be installed such that no harmful interference results from device operation.

1.10.1 AP-7562 Ports and Connections

The AP-7562 Access Point has the following port designations:
• Antenna ports R1-A, B and C, R2-A, B and C
• Console port
• GE1/POE - LAN port
• GE2 - WAN port
AP-7562 Access Point