Connecting The Nibp Cuff Hose - Welch Allyn 53000 Directions For Use Manual
Vital signs monitor 300 series
Hide thumbs
Also See for 53000:
- Service manual (78 pages) ,
- Service manual (107 pages) ,
- Directions for use manual (86 pages)
Table of Contents
Advertisement
Directions for Use
Connecting the NIBP Cuff Hose
Attach the hose to the monitor and the cuff as follows, referring to the illustration below:
1.
Screw the hose connector onto the NIBP connector on the monitor.
2. Connect the monitor hose connector to the mating connector on the cuff.
For information on NIBP measurements, see
"Patient Monitoring"
on page 31.
Chapter 2 Setup
13
Threaded NIBP
Hose Connector
- Quick Links:
- Changing the Time and Date
- Error Codes
Hide quick links:
Advertisement
Table of Contents
